Configuration 3-39
Numeric keypad layout
The layout of the numeric keypad on the keyboard can be switched from the traditional
“calculator” layout to a “telephone” layout.
Upon setting the Calculator/Telephone layout option flag in configuration data, the
keyboard firmware switches from the default “calculator” numeric keypad layout to the
“telephone” numeric keypad layout. If the host needs to restore the default “calculator”
layout, the Calculator/Telephone layout option flag is cleared in configuration data.
Note: Changing the numeric keypad layout also requires physically removing and
swapping the key caps on the first and third rows of the keypad. The key codes for the
numeric keypad are the same as those on a standard keyboard.
To Next Page
Loading...