3-40 Configuration
Double High/Wide Keys
Several keys on the keyboard can accept optional key tips that cover two keys to
produce double high or double wide keys. When a double high/wide key tip is pressed,
the keyboard firmware sends the key code for only one of the two keys.
In the following image, the bar on the keys indicates that a double high/wide keycap
may be installed on the two adjacent keys. The asterisk (*) symbol indicates key locations
that do not generate a key code when pressed simultaneously with another key.
The keyboard supports the following methods of double high/wide key operation:
1. Auto Detection of Double High/Wide Key (factory default state)
2. User configurable Double High/Wide Key by configuring of configuration data
To Next Page
Loading...