3-32 Configuration
Windows Command Line Configuration Utility
The Windows Command Line Configuration utility is a command line tool that flashes
and updates the keymap settings of a keyboard using a .dat configuration file created
by the NCR Matrix Maker utility.
To use the command line configuration utility, perform the following steps:
1. Install the Microsoft package for the Visual Studio 2010 runtime libraries included in
the download package.
Double-click the vcredsit_x86.exe file and follow the on-screen instructions.
2. Open a Command Prompt window as an Administrator.
Right-click on a Command Prompt shortcut→select Run As Administrator→select
Yes.
3. Navigate to the directory where the NCR-KeymapUpdate.exe file is located.
Note: Make sure that the HYHidLib.dll file included in the utility download
package is located in the same directory as the NCR-KeymapUpdate.exe file.
4. At the command prompt, enter the following command:
NCR-KeymapUpdate.exe <1 or 2> <DATfile name>
Where:
• 1 – indicates a 105-Key Compact Alphanumeric Keyboard
• 2 - indicates a 64-Key Keyboard
• DAT file name – indicates the file name of the keymap configuration file to be
installed to the keyboard. This file is created using the NCRMatrix Maker.
5. The window displays a command line to indicate a successful keymap update.
To Next Page
Loading...