NCR 6932-2202-9090 - Menu Options; File; Keyboard

3-22 Configuration
Menu Options
This section provides information on the functions of each menu option in the Matrix
Maker Utility. Refer to the following sections for functions and descriptions of the
Matrix Maker menu options:
• File
• Keyboard
• Diagnostic
File
This option permits the user to perform the following actions:
• New
• Category—takes the user back to the Keyboard Category window
• Keymap—refreshes the Matrix Maker utility and creates a new keymap
• Open—imports a Matrix Maker settings file.
Note: An error may occur if you choose a file of a newer version on the Matrix
Maker software with an older version.
• Save—saves all changes to the current Keymap file.
• Save As—permits user to save the current Keymap file with a new name.
• Exit—closes the Matrix Maker utility
Keyboard
This option provides the following actions that permit keyboard configuration
modifications:
• Update Whole Keyboard—sends the settings of the entire keyboard, which
includes the settings of the MSR, Keyboard, and Key Mapping.
• Update Key Mappings—This option enables the user to send the Key Map settings
to the keyboard.
• Retrieve Keyboard—This option enables the user to retrieve the data currently
programmed to the keyboard device, which includes the settings of the MSR,
Keyboard, and Key Mapping.
Caution: During the updating process, strictly follow these measures:
• Do not press any keys on the keyboard.
• Do not click the mouse.
• Do not touch the Touch panel.
• Write All to Flash—saves all configurations and key mapping to flash memory.