NCR 7601 - Page 87

BIOS Setup 3-79
. OS Timer 0
. BIOS Timer 0
► HDD S.M.A.R.T. Status
SATA Port0 (SATA 3-1) ST250VT000-1BS (250.0)
SMART Status Supported /OK
SATA Port1 (SATA 3-2) Not Present
SMART Status N/A
SATA Port1 (SATA 2-1) Not Present
SMART Status N/A
SATA Port1 (SATA 2-2) Not Present
SMART Status N/A
► USB Configuration
Legacy USB Support [Enabled]
USB3.0 Support [Enabled]
XHCI Hand-off [Enabled]
EHCI Hand-off [Disabled]
Port 60/64 Emulation [Enabled]
USB hardware delays and time-outs:
USB transfer time-out [20 sec]
Device reset time-out [20 sec]
Device power-up delay [Auto]
► Info Report Configuration
Summary Screen [Disabled]
► SMART Settings
SMART Self Test [Disabled]
► System Super IO Configuratoin
. ►Serial Port 1/A Configuration
. Serial Port [Enabled]
. Device Settings IO=3F8h; IRQ=4;
. I/O Base Address [0x3F8]