NCR 7601 - Page 88

3-80 BIOS Setup
. IRQ [IRQ4]
. Device Mode [Standard Serial Po. . .]
. ►Serial Port 2/B Configuration
. Serial Port [Enabled]
. Device Settings IO=2F8h; IRQ=3;
. I/O Base Address [0x2F8]
. IRQ [IRQ3]
. Device Mode [Standard Serial Po. . .]
. ►Serial Port 3/C Configuration
. Serial Port [Enabled]
. Device Settings IO=3E8h; IRQ=11;
. I/O Base Address [0x3E8]
. IRQ [IRQ11]
. Device Mode [Standard Serial Po. . .]
. ►Serial Port 4/D Configuration
. Serial Port [Enabled]
. Device Settings IO=2E8h; IRQ=10;
. I/O Base Address [0x2E8]
. IRQ [IRQ10]
. Device Mode [Standard Serial Po. . .]
. ►Parallel Port Configuration
. Parallel Port [Disabled]
► H/W Monitor
Smart Fan Mode [Automatic Mode]
Fan OFF temperature limit 50
Fan Start temperature limit 60
Fan Start PWM 70
PWM Slope [8 PWM]
Hardware Health Monitoring Typical (Acceptable Range)