Journal Printer
How To Replenish The Dot-Matrix Journal Printer Paper
6-8 NCR
SHUVRQD
V
îî
ATM Operator Manual
16
Push down the paper feed switch and the paper
should be fed through the printer. Hold down the
switch until approximately 254mm (10in.) of paper is
free of the exit slot.
17
Insert the end of the paper into the slot in the take-up
spindle. Rotate the spindle so that the paper wraps
around it at least 3 times.
Book.bk Page 8 Thursday, March 11, 1999 2:24 PM
To Next Page
Loading...