Getting Started
How To Open And Close The Standard Security Enclosure
2-8 NCR
SHUVRQD
V
ATM Operator Manual
The primary and secondary locks must be locked in the
following sequence:
1
Close the door and use the handle to operate the bolt.
2
Lock the primary lock.
3
Lock the secondary lock.
Keylocks
2
The pair of keylock keys supplied with your ATM have
been pre-cut to a random factory-set combination. If one
key should get lost, then you should get a new pair of
keys and then change the keylock setting.
How To Unlock A Keylock
2
To unlock a keylock, insert the key into the lock and turn
it clockwise as far as it will turn.
How To Lock A Keylock
2
To lock a keylock, turn the key counterclockwise as far as
it will turn and then remove the key.
Combination Locks
2
Three variants of combination lock may be fitted to your
ATM:
●
basic combination lock which requires only the
combination to open it
●
combination lock with a keylock fitted in it
●
combination lock with a silent alarm option.
All the variants of the combination lock are three-
number combination locks.
The locks are precision locks, therefore, extreme care
must be taken to align combination numbers with the
index.
Book.bk Page 8 Thursday, March 11, 1999 2:24 PM
To Next Page
Loading...