NCR personaS84 ATM - Supervisor Mode

Getting Started
How To Enter Supervisor Mode
NCR
SHUVRQD
V
 ATM Operator Manual 2-5
Supervisor Mode
2
If you do not have the auto-supervisor option, then you
will have to enter the Supervisor Mode manually.
1
Open the exterior of your ATM.
2
Press the switch on the operator panel to the
SUPERVISOR position.
3
After you have completed the task, press the switch
on the operator panel to the NORMAL position.
4
Close and lock the ATM door.
Supervisor
Normal
Reset
Contrast
Book.bk Page 5 Thursday, March 11, 1999 2:24 PM