Journal Printer
How To Replace The Dot-Matrix Journal Printer Print Head
NCR
SHUVRQD
V
ATM Operator Manual 6-15
How To Replace The Dot-
Matrix Journal Printer Print
Head
6
The indications that the print head needs to be replaced
are:
●
State of Health message that print head life
expectancy has been reached
●
Visual check of the journal roll shows that the print
head is not operating correctly.
To replace the print head proceed as follows:
Warning The print head becomes hot when in operation. After
operation, leave print head to cool for three minutes
before touching it.
1 Open the exterior of the ATM.
2 If your ATM does not have the auto-supervisor
option, press the switch on the operator panel to the
SUPERVISOR position.
Book.bk Page 15 Thursday, March 11, 1999 2:24 PM
To Next Page
Loading...