Motorised Card Reader
How To Remove Captured Cards From The Motorised Card Reader
NCR
SHUVRQD
V
îî
ATM Operator Manual 7-11
Latch Fast Card
Capture Container
7
To remove captured cards from a latch fast capture
container, proceed as follows:
1
Open the exterior of the ATM.
2
If your ATM does not have the auto-supervisor
option, press the switch on the operator panel to the
SUPERVISOR option.
3
Pull the latch stud downwards and turn the operator
interface clockwise.
Book.bk Page 11 Thursday, March 11, 1999 2:24 PM
To Next Page
Loading...