Journal Printer
How To Replenish the Graphics Journal Printer Paper
6-38 NCR
SHUVRQD
V
îî
ATM Operator Manual
16
Press down the paper feed switch until the slack in
the journal roll is taken up.
17
If the paper is too close to one side, open the journal
platen and slide the paper until it is centered
between the guides. Close the platen by pressing
down firmly, the sample graphic should be printed
again.
18
Push the printer back into the ATM until it clicks into
place.
19
Follow your in-house procedures for indicating that
the journal paper has been replaced.
20
If your ATM does not have the auto-supervisor
option, press the switch on the operator panel to the
NORMAL position.
21
Close and lock the ATM door.
Book.bk Page 38 Thursday, March 11, 1999 2:24 PM
To Next Page
Loading...