Motorised Card Reader
How To Clear Motorised Card Reader Jams
NCR
SHUVRQD
V
îî
ATM Operator Manual 7-5
8
If the ATM is configured with a Smart Card
Motorised Reader, the card may be jammed in the
rear of the card reader. Check that the stopper pin
has not jammed by moving the pin backwards and
forwards as shown below.
9
Use your fingers to turn the belt pulleys (clockwise)
and move the card through the transport into the
capture bin.
10
If the stopper is not jammed, and the card is not freed
by turning the belt pulleys, contact your service
representative.
11
When the card has been freed, slide the card reader
back into the ATM.
Book.bk Page 5 Thursday, March 11, 1999 2:24 PM
To Next Page
Loading...