Digital Camera
How To Replace The Digital Camera Cartridge
8-4 NCR
SHUVRQD
V
ATM Operator Manual
5
When the LED on the front of the disk drive unit
stops flashing and the locking lever springs out,
move the lever fully to the up position. DO NOT
ATTEMPT TO MOVE THIS LEVER UNTIL IT HAS
BEEN RELEASED FROM THE LOCKED POSITION.
Remove the cartridge from the drive.
6
Wait for 10 seconds (for the ‘DISK OUT’ LED to come
on) then insert the new or used cartridge fully into
the disk drive. The cartridge should be inserted with
the arrow on the casing pointing into the drive unit.
7
Move the locking lever to the down position. The
LED will flash until the drive has run up to its
operating speed.
Book.bk Page 4 Thursday, March 11, 1999 2:24 PM
To Next Page
Loading...