NCR personaS84 ATM - Page 195

Maintenance
Looking After Your ATM Weekly
NCR
SHUVRQD
V
 ATM Operator Manual 9-5
5
Press the key which corresponds to the
TRANSFER
INTERFACE
option then go to the front of the ATM.
The front display will be blank.
6
Press the
ENTER
(or equivalent) key on the customer
keyboard. Enter the password 2468 and then select
ENTER
again. The Utilities menu will again be
displayed.
7
Press the key on the keyboard which corresponds to
the
MAINTENANCE
option. The maintenance menu will
be displayed.
8
Press the key which corresponds to the
CARD READER
option. The Card Reader menu will be displayed.
9
Prepare the cleaning card according to the
instructions provided with it.
10
Press the key on the keyboard which corresponds to
the
CLEANING CYCLE
option. When instructed to do
so, insert the cleaning card into the card reader.
11
When instructed to do so, remove the cleaning card.
A screen will be displayed giving the results of the
cleaning cycle.
12
Select the FDK to return to the
TEST MENU
. If the
cleaning card you are using has only one cleaning
side on it, turn the card over and run the
CLEANING
CYCLE
a second time. When the test is complete,
select the FDK to return to the
TEST MENU
.
13
Select the FDK to return to the
DEVICE MENU
.
Book.bk Page 5 Thursday, March 11, 1999 2:24 PM