Getting Started
How To Open And Close The Standard Security Enclosure
NCR
SHUVRQD
V
îî
ATM Operator Manual 2-11
5
Turn the dial clockwise until the bolt retracts. The
lock is now open. Use the handle on the door to
retract the door bolt and open the door.
How To Operate The Silent Alarm
2
The silent alarm is triggered, if fitted, by adding 10 to the
first number of the combination. For example if the first
number was 34, dial 44 to trigger the silent alarm. Dial
the next two numbers of the combination as normal, the
combination lock will open as normal but the alarm will
have been triggered.
How To Lock The Combination Lock
2
To lock the combination lock, turn the dial at least four
complete turns counterclockwise. If a keylock is fitted to
the combination lock, turn the dial until 0 is in line with
the opening index and then turn the key
counterclockwise and remove it from the lock.
How To Change The Combination
2
Detailed instructions on how to change the combination
of a lock are inside the security enclosure.
Book.bk Page 11 Thursday, March 11, 1999 2:24 PM
To Next Page
Loading...