NCR POS XR8 - Page 120

7-110 BIOS Setup
Configuration Choices
Configuration Choice
Settings
Notes
SATA Test Mode [Disabled]
Alternate ID [Disabled]
. ►Software Feature Mask Configuration
. RAID0 [Enabled]
. RAID1 [Enabled]
. RAID10 [Enabled]
. RAID5 [Enabled]
. Intel Rapid Recovery
Technology
[Enabled]
. OROM UI and BANNER [Enabled]
. HDDUnlock [Enabled]
. LEDLocate [Enabled]
. IRRT Only on eSATA [Enabled]
. Smart Response
Technology
[Enabled]
. OROM UI Normal Delay [2 Seconds]
. RST Force Form [Disabled]
Aggressive LPM Support [Enabled]
Serial ATA Port 0
Software Preserve SUPPORTED
Port 0 [Enabled]
Hot Plug [Enabled]
Mechanical Presence
Switch
[Enabled]
External SATA [Disabled]
Spin Up Device [Disabled]
SATA Device Type [Hard Disk Drive]
Topology [Unknown]
Device Sleep [Disabled]