Appendix B: Display Color Adjustment
If you are migrating from legacy terminals you may find it necessary to adjust the colors
on the display to match the colors on the older terminals. This is due to the changes in
display hardware and driver technology. Use the following procedure to change the
colors. The procedures are the same for Windows XP and Windows 7 except for the
screens. Both screens are shown.
1. Apply power to the system.
2. Right click the Desktop and then select Graphics Properties from the menu to start
the control panel. Both displays should be recognized.
3. Select Color Correction on a Windows XP system.
Windows XP
To Next Page
Loading...
