Chapter 2: Hardware Installation
This chapter explains how to install the RealPOS 25 hardware, including out-of-box
installation and how to install the optional peripheral devices.
Installation Restrictions
• Before installing the RealPOS 25, read and follow the guidelines in the RealPOS 25
Site Preparation Guide (B005-0000-2018) and the NCR Workstation and Peripheral AC
Wiring Guide (BST0-2115-53).
• Install the RealPOS 25 near an electrical outlet that is easily accessible. Use the
power cord as a power disconnect device.
• Do not permit any object to rest on the power cord. Do not locate the RealPOS 25
where the power cord can be walked on.
• Use a grounding strap or touch a grounded metal object to discharge any static
electricity from your body before servicing the RealPOS 25.
Caution: This unit contains hazardous voltages and should only be serviced by
qualified service personnel.
Caution: Do not connect or disconnect the transaction printer while the terminal is
on. This can result in system or printer damage.
To Next Page
Loading...
