Hardware Installation 2-33
Installing the Terminal
The terminal can be mounted using a variety of mounts.
• Table Top Stand (7610-K320)
• Checkstand Mount (5964-K039
• Wall Mount (7409-K502)
• Integrated with peripherals using the Integration Tray Kit (7610-K304).
This document describes how to install the terminal on the Table Top Stand. For the
other mounting options see the associated kit instructions.
1. Unpack the terminal in the desired location.
2. Lay the terminal face down on a flat surface.
Caution: The front bezel is a painted component and the weight of the terminal
can cause abrasions when moved around on a surface. Always use a soft material
(cloth, foam) to protect the bezel when placing the terminal face down.
To Next Page
Loading...
