NCR RealPOS 60 - Page 37

Hardware Disassembly 15
e. Usingasmallflat‐bladescrewdriver,turntheZIFFconnectorlockingscrewone
halfturnclockwisetolocktheCPU.
Note: MakesuretheCPUremainsflatandfullyseatedwhilelockingthe
socket.
f. VerifytheboardʹsjumpersettingsmatchtheoldMotherboard.
13. InstalltheMemoryModule(s).
14. InstallthenewMotherboardin
theterminalchassis.
15. ConnectalloftheMotherboardcables.
28761a
CPU Socket Latch
CPU