BASIC OPERATION
2-6
2. Features
Take the following action:
Lock Mode
To prevent any calls from being placed on the 900i, you can enable the Lock
Mode feature. This feature allows you to answer any incoming calls, but
restricts the phone for any outgoing use.
To Enable the Lock Mode:
1. Hold down the CHAN button for one second.
The display shows “ENTER 2 DIGITS LOCK CODE=__”.
2. Enter any two-digit number you wish to use for the code.
3. Press the CHAN button.
The display shows ‘LOCK? LOCK CODE=00”
4. Press the CHAN button.
The LOCK icon appears on the display.
To Disable the Lock Mode:
1. Hold down the CHAN button for one second.
The display shows “ENTER 2 DIGITS LOCK CODE=__”.
2. Enter the two-digit number used for the code.
If you forget the 2-digit code, remove the battery from the
handset for two seconds. The phone returns to normal use.
3. Press the CHAN button.
The display clears and returns to an idle state.
During A Call In Standby Mode
Condition Warning Tone Can’t make or answer
calls (Phone may ring
intermittently)
Action Move back in Move back within range
range within
20 seconds
To Next Page
