Onyx VSi System Transfer
2-11
2. Features
For a line you placed on Hold that does not appear on your
phone:
1. Press TALK.
2. Press HOLD.
OR
For a line somebody else placed on System Hold that does not
appear on your phone:
1. Press TALK.
2. Press *.
3. Dial the line access code (e.g., 801) or extension number.
To retrieve an Intercom call from Hold:
1. Press TALK.
2. Press HOLD.
Transfer
This feature is always available.
You can Transfer a call to another extension. If the other party does not answer
the transferred call, you can retrieve it.
You can also Transfer a call from the handset to your optional “desk” phone if
you need to place the cordless phone back into the desk unit for recharging.
To Transfer your call to another extension:
(Do Not Hang Up.)
1. Press CONF and dial the extension number.
You can press a Hotline key instead of dialing the extension
number.
2. Announce the call.
-If you hear ringing, wait for the party to answer before
announcing the call. To Transfer the call unannounced,
skip this step.
-If you hear a busy tone, you can dial ‘C’ to wait in line.
Refer to the Camp-On feature for further information.
Also, your display shows, “HOLD/WAIT”. This indicates
the number of calls on Hold or already Camped-On to the
busy extension.
3. Press TALK or place handset in desktop charger to hang up.
To Next Page
