i-Series System Programmable Function Keys
2-77
2. Features
Programmable Function Keys
Customize your phone by storing features or outside lines under your
Programmable Function Keys. For example, instead of dialing *0 to return a
Message Waiting, just press your Message Waiting function key instead.
To program a function key:
1. TALK + 851 + FUNCTION KEY you want to program.
2. Select key code from chart below.
Programmable Function Key Codes
For this feature Use key When you are Or dial
code
Abbreviated Dialing 1037 Dialing a stored Common #2 + bin
Abbreviated Dialing number
1038 Dialing a stored Group #4 + bin
Abbreviated Dialing number
Barge In 1019 Barging In on a co-worker’s -
conversation
Call Forwarding 1080 Forwarding your calls (station) *2
Call Forwarding Off- 1081 Forwarding your calls (device) *4
Premise
Call Forwarding / Do 1022 Overriding an extension’s Call -
Not Disturb Override Forwarding or Do Not Disturb
Callback / Camp On / 1020 Leaving a Callback request at a 2
Trunk Queuing busy extension, Camping On to a
busy extension, or Queuing for a
busy trunk
Central Office Calls 0001-0192 Pressing a line key to place or #9
answer a trunk call (trunks are
0001-0192).
1078 + Pressing a loop key to place or -
Type + answer a call. Type = 0 (Incoming),
Group 1 (Outgoing) or 2 (Both ways), Group
= 000 (All groups in or ARS out) or
001-128 (Trunk Group)
Conference 1016 Setting up a Conference or a Meet Me #1
Conference
Conference, Voice Call 1017 Setting up a Voice Call Conference -
Data Communications 1029 Placing a data call -
1045 Using your PC for Telemarketing Dial -
Department Step Calling 1021 Step Calling through a Department #
Group for an idle member
Direct Station Selection 1086 Toggling between DSS and DLS -
functions for a 24-button DSS
To Next Page
Loading...
