One Touch Calling i-Series System
2-72
2. Features
To send Off Hook Signals to an extension busy on a handset call:
1. Press 7.
OR
1. FUNCTION KEY (Off Hook Signaling).
If you hear ringback tone, dial 1 to have your call voice-
announce (and visa-versa).
To have Off Hook Signals ring your extension:
1. TALK + 893.
To answer an Off Hook Signal at your extension, you must
first hang up your current call or place it on Hold.
One-Touch Calling
Use your One-Touch Keys for one button access to co-workers, outside lines
and selected system features. You’ll find this a great time saver when calling
the clients and co-workers you talk to most often. Instead of dialing the codes,
just press the One-Touch Key.
Your One-Touch Keys give you:
● Direct Station Selection - One button access to your co-worker’s extensions.
● Abbreviated Dialing - One button access to Common and Group
Abbreviated Dialing bins.
● Feature Codes - One button access to Feature Codes (e.g., 2 for Callback).
● Chain Dialing - Linking two or more One-Touch Keys for lengthy dialing
scenarios.
These keys must be assigned in system programming. Ask your communica-
tions manager for further information.
To use a One-Touch Key:
1. FUNCTION KEY (One-Touch).
If you press a line key before pressing a One-Touch Key for
outside calling, the system automatically removes any
stored trunk codes.
To chain the functions of two One-Touch Keys:
1. FUNCTION KEY (One-Touch).
Let the stored number dial out.
2. Press another FUNCTION KEY (One-Touch).
The stored digits dial out.
To Next Page
