Group Ring Onyx VSi System
2-20
2. Features
Group Ring
During installation, certain extensions in your system were arranged into Ring
Groups. When you call a Ring Group number, all extensions in the Ring Group
ring. You can also answer a Ring Group call.
To place a call to a Ring Group:
(You can program this on a Feature key. Refer to “Speed Dial” for
further information.)
1. Press TALK.
2. Dial the Ring Group number (e.g., 428).
You hear ringing; wait for an answer.
To answer a Ring Group call at any phone.
(You can program this on a Feature key. Refer to “Speed Dial” for
further information.)
1. Press TALK.
2. Dial the Ring Group number (e.g., 428).
You are connected to the caller.
To answer a Ring Group call ringing your group:
1. Press TALK.
Headset
If you have a Headset, you can use it instead of the handset. Using the headset
frees up your hands for other work.
To install the Headset:
1. Lift the rubber cover on the headset jack on the phone.
2. Plug the headset connector into the connector.
To operate a Headset:
1. Press TALK to initiate a call or to hang up an active call.
Hotline
Hotline gives you one-button calling and Transfer to another extension (your
Hotline Partner). The Hotline key on your phone shows the status of your part-
ner’s extension.
To Next Page
