Caller ID Onyx VSi System
2-16
2. Features
To answer a Caller ID call (with the pre-answer display dis-
abled):
1. Press TALK and then press the flashing line key.
You see the incoming caller’s name and number and you
answer the call.
To answer a Caller ID call (with the pre-answer display
enabled):
1. Press the flashing line key to display the incoming caller’s
phone number.
You can press another flashing line key instead of going to
the next step.
2. Press the flashing line key again to display the incoming
caller’s name.
-If the telephone company does not offer the name option,
you skip to the next step.
-You can press another flashing line key instead of going to
the next step.
3. Press TALK to answer the call.
If you previewed several ringing lines, you’ll answer the
call on the most recently pressed line key.
To re-display the Caller ID information for the call you are on:
1. Press the line key for the call.
When you see ... It means ...
PRIVATE Your caller has blocked Caller ID.
OUT OF AREA Your caller has dialed from an area that
does not support Caller ID.
UNAVAILABLE Your telephone company’s Caller ID
service is out of order.
To Next Page
Loading...
