7
Note 1: When calling a multiline telephone, dialing 1 after the station
number will change ringing to voice or voice to ringing.
Note 2: To directly access a personal voice mailbox, dial 7 after dialing
the station number.
Outside Calls
1. Lift the handset.
2. Dial the trunk access code, i.e. 9.
OR
Press an idle Outside Line key.
3. Dial the telephone number.
4. Converse.
Trunk Queuing
After dialing the trunk access code or pressing a busy Line key and
receiving the trunk busy indication:
1. Dial the Trunk Queue set code 78.
2. Replace the handset.
Note: When a line is available, your telephone will ring; lift the
handset and place the call.
Last CO/PBX Number Redial
1. Lift the handset.
2. Press the Redial key.
3. Dial the Last Number Redial code
*.
4. Converse.
To Next Page
Loading...
