NEC Electra Elite IPK - Feature Access Keys; Station Speed Dial Programming via Feature Access Keys; DSS;BLF and Feature Access Programming

27
Feature Access Keys
Note 1: Press the Redial key to insert a pause or Recall to store a
hookflash.
Note 2: The Busy Lamp Field status indication will be provided on the
keys programmed for DSS.
Station Speed Dial
(Outside Numbers)
DSS/BLF (Stations) and
Feature Access
1. Press the Feature key.
2. Press the Redial key.
3. Press the Feature
Access key to be
programmed.
4. Dial 0.
5. Dial the trunk access
code, i.e. 9 (if necessary).
6. Dial the telephone
number to be stored (16
digits maximum).
7. Press the Feature key
again.
1. Press the Feature key.
2. Press the Redial key.
3. Press the Feature
Access key to be
programmed.
4. Dial 1 and the station
number to be stored.
OR
Dial the feature access code
to be stored as indicated in
the Quick Entry Guide.
5. Press the Feature key
again.