21
SET RELOCATION
1. Ask the Attendant to turn on Set Relocation Mode.
2. From the new location, press the Speaker key, the LED then
lights.
3. Dial Set Relocation code ____.
4. Dial your station number.
5. Dial the Station Password [same as the Station Lockout
(Password) code].
6. Hear the confirmation tone and then press the Speaker key.
7. Inform the Attendant that your relocation is complete and request
that the Attendant turn Set Relocation Mode off.
STATION OUTGOING LOCKOUT
Changing Lockout (Password) Code
1. Press the Speaker key.
2. Dial the Lockout (Password) Change access code ____.
3. Dial the current Lockout (Password) code.
4. Dial the new Lockout (Password) code.
5. Press the Speaker key again.
Note 1: By default, the Lockout (Password) code is set at 0000000000
(10 zeros).
Note 2: When the Lockout (Password) code is set for the first time, the
station is automatically restricted.
Note 3: Lockout (Password) code may be a maximum of 10 digits. If the
new Lockout (Password) code is less than 10 digits, press the
Speaker key to enter.
Note 4: When set, the Station Outgoing Lockout restricts all outgoing
calls.
To Next Page
Loading...
