28
One Touch Keys
Note 1: Press the Redial key to insert a pause or Recall to store a
hookflash.
Note 2: The Busy Lamp Field status indication will be provided on the
keys programmed for DSS.
Station Speed Dial
(Outside Numbers)
DSS/BLF (Stations) and
Feature Access
1. Press the Feature key.
2. Press the Redial key.
3. Press the One Touch key
to be programmed.
4. Dial 0.
5. Dial the trunk access
code, i.e. 9 (if necessary).
6. Dial the telephone
number to be stored (16
digits maximum).
7. Press the Feature key
again.
1. Press the Feature key.
2. Press the Redial key.
3. Press the One Touch key
to be programmed.
4. Dial 1 and the station
number to be stored.
OR
Dial the feature access code
to be stored as indicated in
the Quick Entry Guide.
5. Press the Feature key
again.
To Next Page
Loading...
