11
Note 2: To return to the original party, press the flashing Line key or Conf
key.
Note 3: A Feature Access key or One Touch key may be assigned for
DSS.
Note 4: To transfer a call directly to a personal voice mailbox, dial 7 after
dialing the station number.
CONFERENCE
With a call in progress:
1. Press the Conf key.
2. Place the second call (internal or external).
3. Announce the conference.
4. Press the Conf key to establish the conference.
Note 1: Repeat the above procedure to add an additional party
(maximum of 2 for outside calls or 3 inside calls).
Note 2: An unsupervised conference may be established by pressing
the Conf key again, after the conference has been established.
The parties may continue to converse in private. Press the
flashing Conf key to return to the conversation. This feature is
available if programmed in your system by your system
administrator.
CONFERENCE BRIDGE
To make a call using a Conference Bridge:
1. Call a Confer
ence Bridge extension.
2. When the voice prompt is heard, enter the password and press #.
3. Start the conference call.
To Next Page
Loading...
