NEC Electra Elite IPK - Page 15

12
Start a conference call from an incoming CO call using an Automated
Attendant:
1. Call an outside line that is answered by an Automated Attendant.
2. Dial the extension of the Conference Bridge.
3. When the voice prompt is heard, enter the password and press
#.
4. Start the conference call.
Start a conference call from an off premise location:
1. Call a line that is directed to the Conference Bridge.
2. When the voice prompt is heard, enter the password and
press #.
3. Start the conference call.
Start a conference call from an incoming CO call using an Attendant:
1. Call the Attendant and ask to be transferred to a Conference
Bridge extension.
2. Wait until the transfer is complete.
3. When the voice prompt is heard, enter the password and
press #.
4. Start the conference call.
Note: Default passwords: Conference #1 = 0001
Conference #2 = 0002