NEC Electra Elite IPK - Station Speed Dial - Dial Access; Station Speed Dial Dial Access

26
Station Speed Dial — Dial Access
1. Press the Feature key.
2. Press the Redial key.
3. Dial the Speed Dial Memory location 80~99.
4. Dial the trunk access code, i.e. 9 (if necessary).
5. Dial the telephone number to be stored (24 digits maximum).
6. Press the Hold key (if entering a name) and dial the name of the
party (13 letters maximum).
7. Press the Feature key again
Note 1: Press the Redial key to insert a pause or Recall to store a
hookflash.
Note 2: Use the dial pad on the telephone when entering the name of
the party.