8
Station/System Speed Dial
1. Lift the handset.
2. Press the Redial key and dial the Speed Dial Memory location:
• Station Speed Dial 80~99.
• System Speed Dial 00~79.
OR
Press the Feature Access key or One Touch key programmed
for the Station Speed Dial.
3. Converse.
Scrolling Speed Dial Directories
1. Press the Speed Dial Softkey.
• SYS System Speed Dial
• STA Station Speed Dial
2. Press the UP/DOWN Softkeys to scroll through all the entries.
OR
Use the dial pad to enter the first letter of the desired entry then
dial
*.
Press the UP/DOWN Softkeys to scroll.
Lift the handset or press the Speaker key or press an idle
Outside Line key to place a call to the displayed entry.
OR
Press Feature or Exit or wait 10 seconds to cancel.
Note: For example, when using the dial pad to search the directory
for the name “Ann”, dial the number 2 on the dial pad followed
by *. To search for “Bob”, dial the number 2 twice and then *.
To search for “Carol”, dial the number 2 three times and then *.
To search for “Dan”, dial the number 3 followed by *.
To Next Page
Loading...
