NEC Express5800 Series - Page 181

1. IML Error Message
Express5800/R120h-1E, R120h-2E Maintenance Guide
181
Chapter 3 Appendix
(1) List on Error messages related to the operating environment of the server
Class
Error
code
Error message Action
Environment 13
System Overheating (Temperature Sensor %1,
Location %2, Temperature %3)
Check the ambient temperature where the unit
is being operated.
If the problem persists, contact your sales
representative.
Environment 14
External Chassis Overheating (Chassis %1,
Temperature Sensor %2, Location %3,
Temperature %4)
Check the ambient temperature where the
expansion chassis connected to the unit is
being operated.
If the problem persists, contact your sales
representative.
Environment 15
%1 Storage System Overheating (%2Slot %3,
Temperature Sensor %4, Location %5,
Temperature %6)
Check the ambient temperature where the %1
connected to the unit is being operated.
If the problem persists, contact your sales
representative.
Environment 16
%1 Overheating (Temperature Sensor %2,
Location %3, Temperature %4, %5)
Check the ambient temperature where the %1
connected to the unit is being operated.
If the problem persists, contact your sales
representative.
Environment 17 Fan Failure (Fan %1, Location %2) Contact your sales representative.
Environment 18
External Chassis Fan Failure (Chassis %1,
Fan %2, Location %3)
Contact your sales representative.
Environment 19
%1 Storage System Fan Failure (%2 Slot %3,
Fan %4, Location %5)
Contact your sales representative.
Environment 1A %1 Fan Failure (Fan %2, Location %3, %4) Contact your sales representative.
Environment 1B System Fan Removed (Fan %1, Location %2) Action is not necessary.
Environment 1C
External Chassis Fan Removed (Chassis %1,
Fan %2, Location %3)
Action is not necessary.
Environment 1D
%1 Storage System Fan Removed (%2Slot %3,
Fan %4, Location %5)
Action is not necessary.
Environment 1E %1 Fan Removed (Fan %2, Location %3, %4) Action is not necessary.
Environment 1F System Fan Inserted (Fan %1, Location %2) Action is not necessary.
Environment 20
External Chassis Fan Inserted (Chassis %1,
Fan %2, Location %3)
Action is not necessary.
Environment 21
%1 Storage System Fan Inserted (%2Slot %3,
Fan %4, Location %5)
Action is not necessary.
Environment 22 %1 Fan Inserted (Fan %2, Location %3, %4) Disposal is not necessary.
Environment 23 System Fans Not Redundant (Location %1) Contact your sales representative.