NEC Express5800 Series - Page 198

1. IML Error Message
Express5800/R120h-1E, R120h-2E Maintenance Guide
198
Chapter 3 Appendix
Class
Error
code
Error message Action
UEFI 467
Uncorrectable Error was detected on
Processor %1.
Contact your sales representative.
UEFI 470
SATA device on Controller %1 Port %2 is
unresponsive.
Contact your sales representative.
UEFI 480
IMPORTANT: Processor %1, DIMM %2 -
NVDIMM-N firmware updated. Current
version is %3.
Action is not necessary.
UEFI 481
NVDIMM Error - Firmware Update Error -
Processor %1, DIMM %2
(SN:%3-%4-%5-%6). NVDIMM-N firmware
was not updated. Current version is %7.
Contact your sales representative.
UEFI 482
NVDIMM Error - Invalid Firmware Image
Detected - Processor %1, DIMM %2
(SN:%3-%4-%5-%6). NVDIMM-N
switching to backup image. Current version
is %7.
Contact your sales representative.
UEFI 483
NVDIMM Error - NVDIMM(s) cannot be
initialized due to internal error (Code
= %1). NVDIMM functionality might be
impacted
Updating the system ROM and the innovation engine
firmware may solve the error. Please update the system
ROM and the innovation engine firmware.
If the problem persists, contact your sales
representative.
UEFI 490
System Health Error. A critical system
health error requires the system to be
shutdown.
Contact your sales representative.
UEFI 491
System Health Error. A critical system
health error has kept the system from
booting. -System Halted!
Contact your sales representative.
UEFI 500
ASR NMI Detected - The Automatic Server
Recovery (ASR) NMI has been signaled
(per the system configuration policy).
Contact your sales representative.
UEFI 501
IPMI Watchdog NMI Detected - The IPMI
Watchdog NMI has been signaled (per the
system configuration policy).
Contact your sales representative.
UEFI 502
Application Watchdog NMI Detected - The
Application Watchdog NMI has been
signaled (per the system configuration
policy).
Contact your sales representative.
UEFI 510
The installed number of DIMMs on one or
more processors results in an unbalanced
memory configuration across memory
controllers. This may result in non-optimal
memory performance.
Referring to the user’s guide, change the mounting
positions or number of DIMM.
In case a problem is not resolved, contact your sales
representative.
UEFI 511
One or more DIMMs have been mapped
out due to a memory error, resulting in an
unbalanced memory configuration across
memory controllers. This may result in
non-optimal memory performance.
Contact your sales representative.