1. IML Error Message
Express5800/R120h-1E, R120h-2E Maintenance Guide
209
Chapter 3 Appendix
Class
Error
code
Error message Action
UEFI 348
Unsupported DIMM Configuration
Detected - Processor %1 DIMM %2.
Registered DIMMs are only supported
when an NVMDIMM is present in the
system. (Major Code:%3, Minor Code:%4).
Remove the DIMM which was pointed out. For the
details of the DIMM configuration, refer to the User's
Guide. If the problem persists, contact your sales
representative.
UEFI 349
NVDIMM Population Error - NVDIMMs and
LRDIMMs are installed in this system.
NVDIMMs are only supported with
RDIMMs on this system.
Remove the LRDIMM. For the details of the DIMM
configuration, refer to the User's Guide. If the problem
persists, contact your sales representative.
UEFI 350
NVDIMM Population Error - Processor %1,
DIMM %2. NVDIMMs and RDIMMs are in
the incorrect order on Channel %3.
NVDIMMs on the channel should be
closest to the CPU.
Check and change the DIMM configuration for the rules
of the installation. For the details of the DIMM
configuration, refer to the User's Guide. If the problem
persists, contact your sales representative.
UEFI 358
IMPORTANT: Processor %1, DIMM %2 -
The installed NVDIMM has a Supercap
attached. This is not supported.
Remove the Supercap which was pointed out. For the
details of the DIMM configuration, refer to the User's
Guide. If the problem persists, contact your sales
representative.
UEFI 359
NVDIMM Population Error - Processor 1
must have at least one RDIMM installed
when NVDIMMs are present in the system.
Check and change the DIMM configuration for the rules
of the installation. For the details of the DIMM
configuration, refer to the User's Guide. If the problem
persists, contact your sales representative.
UEFI 365
Unsupported NVDIMM-N Configuration
Detected - The installed NVDIMM-Ns are
not compatible with each other. (Major
Code:%1, Minor Code:%2).
Check and change the DIMM configuration for the rules
of the installation. For the details of the DIMM
configuration, refer to the User's Guide. If the problem
persists, contact your sales representative.
UEFI 367
System ROM Authentication Error - The
System ROM image could not be
authenticated or recovered.
Update the system ROM and the redundant ROM.
If the problem persists, contact your sales
representative.
UEFI 368
System ROM Authentication Error - The
BIOS image could not be authenticated.
An attempt will be made to recover automatically.
If the problem persists, contact your sales
representative.
UEFI 369
System ROM Authentication Error - The
system is operating on a recovered or
redundant image. Redundant ROM
functionality is NOT available.
Confirm the revision of the system ROM. Update the
ROM to restore the redundancy of the system ROM.
If the problem persists, contact your sales
representative.
UEFI 370
Redundant ROM Image Authentication
Error - The Redundant ROM image could
not be authenticated. Redundant ROM
functionality is NOT available.
Update the system ROM and the redundant ROM.
If the problem persists, contact your sales
representative.
UEFI 389
Unexpected Shutdown and Restart - An
undetermined error type resulted in a
reboot of the server.
If the problem persists, contact your sales
representative.
To Next Page
Loading...
