NEC Express5800 Series - Page 215

1. IML Error Message
Express5800/R120h-1E, R120h-2E Maintenance Guide
215
Chapter 3 Appendix
(5) The list of messages about the rack infrastructure
Class
Error
code
Error message Action
Rack Infrastructure 1B
%1 Inadequate Power To Power On: %2
(Enclosure Serial Number %3, Bay %4)
Contact your sales representative.
Rack Infrastructure 1C
%1 Inadequate Power To Power On: %2
(Enclosure Address %3, Slot %4)
Action is not necessary.
Rack Infrastructure 1D
%1 Rack Name Changed (Enclosure Serial
Number %2)
Action is not necessary.
Rack Infrastructure 1E
%1 Rack Name Changed (Enclosure
Address %2)
Action is not necessary.
Rack Infrastructure 1F
%1 Name Changed (Enclosure Serial
Number %2)
Action is not necessary.
Rack Infrastructure 20 %1 Name Changed (Enclosure Address %2) Action is not necessary.
Rack Infrastructure 21
%1 Service Change (Enclosure Serial
Number %2)
Action is not necessary.
Rack Infrastructure 22 %1 Service Change (Enclosure Address %2) Action is not necessary.
Rack Infrastructure 23
%1 Rack Name Conflict (Enclosure Serial
Number %2)
Action is not necessary.
Rack Infrastructure 24
%1 Rack Name Conflict (Enclosure
Address %2)
Action is not necessary.
Rack Infrastructure 25
%1 Rack Unique ID Changed (Enclosure
Serial Number %2)
Action is not necessary.
Rack Infrastructure 26
%1 Rack Unique ID Changed (Enclosure
Address %2)
Action is not necessary.
Rack Infrastructure 27
%1 LAN Settings Changed (Enclosure Serial
Number %2)
Action is not necessary.
Rack Infrastructure 28
%1 LAN Settings Changed (Enclosure
Address %2)
Action is not necessary.
Rack Infrastructure 29
%1 UID LED State Changed (Enclosure
Serial Number %2)
Action is not necessary.
Rack Infrastructure 2A
%1 UID LED State Changed (Enclosure
Address %2)
Action is not necessary.
Rack Infrastructure 2B
%1 Rack Infrastructure Changed (Enclosure
Serial Number %2, Type %3)
Action is not necessary.
Rack Infrastructure 2C
%1 Rack Infrastructure Changed (Enclosure
Address %2, Type %3)
Action is not necessary.
Rack Infrastructure 2D
Chassis Enclosure Serial Number %1
requires minimum firmware revision
0x%2.0x%3. It is currently 0x%4.0x%5.
Updating the firmware to the latest version can
resolve the problems. Update the firmware of
the enclosure whose serial number is %1. If the
problem persists, contact your sales
representative.
Rack Infrastructure 2E
Chassis Enclosure Address %1 requires
minimum firmware revision 0x%2.0x%3. It is
currently 0x%4.0x%5.
Updating the firmware to the latest version can
resolve the problems. Update the firmware of
the enclosure whose address is %1. If the
problem persists, contact your sales
representative.
Rack Infrastructure 2F
%1 Power Request Denied: %2 %3
(Enclosure Serial Number %4, Bay %5)
Contact your sales representative.
Rack Infrastructure 30
%1 Power Request Denied: %2 (Enclosure
Address %3, Slot %4)
Action is not necessary.