NEC Express5800 Series - Page 216

1. IML Error Message
Express5800/R120h-1E, R120h-2E Maintenance Guide
216
Chapter 3 Appendix
(6) The list of the other messages
Class
Error
code
Error message Action
ASR 1 ASR Detected by System ROM Contact your sales representative.
ASR 3 ASR Reset Limit Detected by System ROM Contact your sales representative.
OS 2 Automatic Operating System Shutdown %1 Contact your sales representative.
OS 4 A User initiated NMI Switch event detected
If the record results from the NMI switch
operation, an additional action is not required.
OS 6
A User initiated remote NMI Switch event
detected
If the record results from the NMI switch
operation, an additional action is not required.
Network 8
Network Adapter Link Down (Slot %1,
Port %2)
Contact your sales representative.
Network 9
Network Adapter Link Down (Chassis %1,
Slot %2, Port %3)
Contact your sales representative.
Network A
%1 Connectivity status changed to %2 for
adapter in slot %3, port %4
Contact your sales representative.
Network B
Fiber Channel Host Controller has a new
Status %1
Contact your sales representative.
Network C
Redundancy status changed to %1 by
adapter in slot %2, port %3
Contact your sales representative.
Drive Array 12
%1 Smart Array - Controller Failure
(Status: %2)
Contact your sales representative.
Drive Array 13
Drive Array Controller Failure (Chassis %1,
Slot %2)
Contact your sales representative.
Drive Array 14
%1 Smart Array - Drive is failed: Port %2
Box %3 Bay %4
Contact your sales representative.
Drive Array 15
%1 Smart Array - SSD Wear Status
Level %2: Port %3 Box %4 Bay %5
Contact your sales representative.
Drive Array 16
%1 Smart Array - Predictive drive failure:
Port %2 Box %3 Bay %4
Contact your sales representative.
Drive Array 17
%1 Smart Array - Cache Status: %2 (Error
Code: %3)
Contact your sales representative.
Drive Array 18
%1 Smart Array - Drive could not be
authenticated as genuine drive. Smart Array
will not control the LEDs: Port %2 Box %3
Bay %4
Contact your sales representative.
Drive Array 1E
%1 Smart Array - Drive status changed.
Status is : %2
Contact your sales representative.