159
STEP 2: Dial # or while message displays. Mes-
sage is erased.
VOICE MAIL SYSTEM
To Set
STEP 1: Press key.
STEP 2: Press
(Enter) or key.
STEP 3: Dial desired “Voice Mail System” access
code.
STEP 4: Press key again.
To Originate
STEP 1: Press key.
STEP 2: Hear ringback tone.
– Or –
STEP 2: Press (Enter) key. The Shortcut menu
screen is displayed on LCD.
STEP 3: Select Voice Mail and then press
(En-
ter), (Right-cursor) or OK soft key to access
a preset Voice Mail System.
STEP 4: Hear ringback tone.
MEET-ME PAGING
Example:
Station A can page Station B. When Station B dials
answer code, they are connected.
To Page (Station A)
STEP 1: Dial “Paging” access code, receive continu-
ous ringback for one second.
STEP 2: Page station B.
STEP 3: Remain off hook or hang up.
Note:
If station that left message is busy, callback or
MSG may be set. If station that left message
does not answer, MSG may be set, notifying orig-
inating party that a message return was
attempted.
To Next Page
Loading...
