167
Using Soft Key
STEP 1: Press flashing DND Soft Key.
PRIVACY RELEASE
Example:
DT Series Station B is engaged in a conversation,
and allows DT Series Station A to enter the call in
progress.
STEP 1: Station A lifts handset or presses key.
Station A presses the line appearance of Sta-
tion B.
Warning tone is sent to the interrupted par-
ties (optional).
A three-way conference is established.
– OR –
Example:
DT Series Station A requests entrance into Station
B’s call in progress.
STEP 1: Station A lifts handset or presses key.
STEP 2: Station A presses the line appearance of Sta-
tion B.
STEP 3: Station B LCD indicates as follows:
STEP 4: Station B may allow Station A to enter the
conversation by pressing P-RLS.
STEP 5: Warning tone is sent to the interrupted parties
(optional).
STEP 6: A three-way conference is established.
Note:
DND must be programmed by the Telephony
Server Admin. on a Programmable feature key.
Note:
Station A may also be a single-line station as
long as it appears on the Station B DT Series.
To Next Page
Loading...
