NEC ITL-8LD-1 - DT730 - 8 Button DESI Less Display IP Phone - 9. Menu List; MENU LIST FOR DT730 SERIES

193
TO FIND A REGISTERED DATA
• To Search by Group Name
STEP 1: Open the Directory screen (see TO ADD
NEW DATA).
STEP 2: Select Search on the Directory screen.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 3: Select Group.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 4: Select a target group.
In this example, Colleagues is selected.
Select an item by either of the following operations.
• Highlight an item by using , and then press
or OK soft key.
• Press key, and then press or OK soft key.
STEP 5: Select a target name by pressing .
In the following Directory (Name List) screen,
you can make a call to the selected party by
pressing or Call soft key. If two or more tele-
Note: For the firmware version earlier than 5.0.0.0,
Back is displayed instead of Menu.
DT730
1
1
1
2
[Directory]
3
4
0
Own Number
Delete All
Edit
OKMenu
↓
Group Setting
Search
1
1
1
2
[Search]
3
4
Others
Name
OKBack
↓
Tel Number
Group
2
2
1
2
[Group]
3
4
5
6
20
Colleagues
OKBack
Group 6
Family
Friends
Default
VIPs
Group 20
↓
:
↓