212
TO DELETE ALL DATA
STEP 1: Open the Directory screen (see TO ADD
NEW DATA).
STEP 2: Select Delete All.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 3: Press or OK soft key to delete all the da-
ta.
STEP 4: After all the directory data is deleted, the dis-
play changes as follows:
STEP 5: Press or OK soft key.
Note:
For the firmware version earlier than 5.0.0.0,
Back is displayed instead of Menu.