NEC ITL-8LD-1 - DT730 - 8 Button DESI Less Display IP Phone User Manual

164
STEP 3: Press BOSS/SEC OVERRIDE. Receive
Ringback Tone.
Boss
STEP 1: Hear 3 bursts of tone. LCD indicates:
Option 1
STEP 1: Boss presses key and converses with
secretary. Trunk A is placed on hold.
STEP 2: Secretary hangs up. Boss is connected to
Trunk B.
STEP 3: Boss can alternate between the two parties
by pressing key.
Option 2
STEP 1: Boss presses key and converses with
secretary. Trunk A is placed on hold.
STEP 2: Boss presses station 01 key and converses
with Trunk B. Boss presses key to re-
connect to Trunk A.
STEP 3: Secretary hears reorder tone, hangs up.
STEP 4: Boss can alternate between the two parties
by pressing key.
Option 3
STEP 1: If boss does not respond to 3 bursts of tone,
secretary presses key.
STEP 2: Secretary is connected to Trunk B.
Option 4
STEP 1: Boss presses key and converses with
Secretary. Trunk A is placed on hold.
STEP 2: Boss denies call, presses key to re-
turn to Trunk A.
STEP 3: Secretary is returned to Trunk B.
DO NOT DISTURB
While Idle (On Hook)
STEP 1: Press DND. LED lights.
Boss’ station
number
C WAIT 2000
1:25 PM MON 12 JUL 2010
Secretary’s station
number
C WAIT 2001
1:25 PM MON 12 JUL 2010
Answer
Answer
Answer
Answer
Note:
With Soft Key operation, "DND" flashes when
set.
Answer
Recall
Answer
Transfer
DT730/710
DT330/310
DND SET
1:25 PM MON 12 JUL 2010

NEC ITL-8LD-1 - DT730 - 8 Button DESI Less Display IP Phone Specifications

General

Brand	NEC
Model	ITL-8LD-1 - DT730 - 8 Button DESI Less Display IP Phone
Category	Telephone
Language	English