NEC ITL-8LD-1 - DT730 - 8 Button DESI Less Display IP Phone - TO ENABLE;DISABLE OFF-HOOK RINGING

46
SETUP WITH MENU KEY FOR
DT700 SERIES
• TO ENABLE/DISABLE OFF-HOOK
RINGING
The procedure below shows how to enable/disable Off-
hook ringing.
STEP 1: Display the Menu screen, and select Setting.
STEP 2: Select User Setting.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 3: Select Incoming Call.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 4: Select Offhook Ring (DT730) / Off-
hook Ring (DT710)
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key (DT730) / key (DT710)
Note: For the firmware version earlier than 5.0.0.0,
Back is displayed instead of Menu.
DT730/DT710
1
1
1
2
Data Backup/Restore
[Setting]
3
Download
OKMenu
↓
User Setting
1
1
1
2
Display
[User Setting]
3
4
5
6
7
Change Password
Peripherals
Talk
OKBack
↓
Security
Incoming Call
Usability
2
1
2
1
1
2
Headset Ring
[Incoming Call]
3
4
5
6
Ring Tone
Headset Ring Volume
OKBack
↓
Illumination
Ring Volume
Offhook Ring