NEC ITL-8LD-1 - DT730 - 8 Button DESI Less Display IP Phone - TO SET RINGING OF HEADSET

47
STEP 5: To disable/enable the off-hook ringing, select
Disable or Enable.
Select an item by one of the following operations.
• Highlight an item by using , and then press
or OK soft key.
• Press or key, and then press or OK soft
key.
• TO SET RINGING OF HEADSET
The procedure below shows how to enable/disable the
ringing of headset.
STEP 1: Display the Menu screen, and select Setting.
STEP 2: Select User Setting.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
Note:
Default setting is 2 Enable.
Note:
The enabled item is highlighted.
1
2
1
2
[Offhook Ring]
OKBack
1
2
Disable
Enable
↓
Note: For the firmware version earlier than 5.0.0.0,
Back is displayed instead of Menu.
DT730
1
1
1
2
Data Backup/Restore
[Setting]
3
Download
OKMenu
↓
User Setting