NEC ITL-8LD-1 - DT730 - 8 Button DESI Less Display IP Phone - Page 56

48
STEP 3: Select Incoming Call.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 4: Select Headset Ring.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 5: To disable/enable the ringing of headset, se-
lect Disable or Enable.
Select an item by one of the following operations.
• Highlight an item by using , and then press
or OK soft key.
• Press or key, and then press or OK soft
key.
1
1
1
2
Display
[User Setting]
3
4
5
6
7
Change Password
Peripherals
Talk
OKBack
↓
Security
Incoming Call
Usability
3
3
1
2
[Incoming Call]
3
4
5
6
Ring Tone
Headset Ring Volume
OKBack
↓
Illumination
Ring Volume
Offhook Ring
↓
Headset Ring
Note:
Default setting is 1 Disable.
Note:
The enabled item is highlighted.
1
2
1
2
[Headset Ring]
OKBack
1
2
Enable
Disable
↓