NEC ITL-8LD-1 - DT730 - 8 Button DESI Less Display IP Phone - TO SET RINGER TONE

49
• TO SET RINGER TONE
The procedure below shows how to change the ringer
tone for internal call and external call.
STEP 1: Display the Menu screen, and select Setting.
STEP 2: Select User Setting.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 3: Select Incoming Call.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 4: Select Ring Tone (DT730) / Ring
Tone (DT710)
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key (DT730) / key (DT710)
STEP 5: Select External Call when setting the
ringer tone for external calls. Select Inter-
nal Call when setting the ringer tone for inter-
Note: For the firmware version earlier than 5.0.0.0,
Back is displayed instead of Menu.
DT730/DT710
1
1
1
2
Data Backup/Restore
[Setting]
3
Download
OKMenu
↓
User Setting
1
1
1
2
Display
[User Setting]
3
4
5
6
7
Change Password
Peripherals
Talk
OKBack
↓
Security
Incoming Call
Usability
4
2
4
2
1
2
[Incoming Call]
3
4
5
6
Headset Ring Volume
OKBack
↓
Illumination
Ring Volume
Offhook Ring
↓
Headset Ring
Ring Tone
1
2