203
• To Search by Company Name
STEP 1: Open the Directory screen (see TO ADD
NEW DATA).
STEP 2: Select Search.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 3: Select Others.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 4: Select Company.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 5: Enter a company name.
After entering the name, Press or OK soft key.
Note:
For the firmware version earlier than 5.0.0.0,
Back is displayed instead of Menu.